10 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com precautions please review the notes on correct use, safety and precautions found on pages t10 & t11 of nic?s electrolytic capacitor catalog . also found at www.niccomp.com/precautions if in doubt or uncertainty, please review your speci c application - process details with nic?s technical support personnel: tpmg@niccomp.com surface mount aluminum electrolytic capacitors features ? cylindrical v-chip contruction ? low profile, 4.6mm maximum height ? designed for reflow soldering characteristics nacp series rated voltage rating 4 ~ 50vdc rated capacitance range 0.1 ~ 220 f operating temperature range -40 ~ +85c capacitance tolerance 20%(m) max. leakage current after 2 minutes at 20c 0.01cv or 3 a, whichever is greater surge voltage & max. tan w.v. (vdc) 4 6.3 10 16 25 35 50 s.v. (vdc) 5 8.0 13 20 32 44 63 tan @ 120hz/20c 0.40 0.30 0.24 0.20 0.16 0.14 0.12 low temperature stability (impedance ratio @ 120hz) w.v. (vdc) 4 6.3 10 16 25 35 50 z-25c/z +20c 7 4 3 2 2 2 2 z-40c/z +20c 15 10 8 6 4 4 4 load life test at rated w.v. 85c 1,000 hours capacitance change within 25% of initial measured value tan less than 200% of speci? ed value leakage current less than speci? ed value standard product and case size d xl (mm) dimensions (mm) nacp 470 m 16v 6.3x4.5 tr 13 f rohs compliant 97% sn (min.), 3% bi (max.) 330mm (13?) reel tape & reel size in mm working voltage tolerance code m=20% capacitance code in f, ? rst 2 digits are signi? cant third digit is no. of zeros, ?r? indicates decimal for values under 10 f series part number system 0.3mm max. d l + - i i w p a b case size d 0.5 l0.1 a/b0.2 i 0.2 w p0.2 4x4.5 4.0 4.5 4.3 1.8 0.5 ~ 0.8 1.0 5x4.5 5.0 4.5 5.3 2.1 0.5 ~ 0.8 1.4 6.3x4.5 6.3 4.5 6.6 2.5 0.5 ~ 0.8 2.2 cap. ( f) working voltage (vdc) 4 6.3 10 16 25 35 50 0.1 - - - - - - 4x4.5 0.22 - - - - - - 4x4.5 0.33 - - - - - - 4x4.5 0.47 - - - - - - 4x4.5 1.0 - - - - - - 4x4.5 2.2 - - - - - - 4x4.5 3.3 - - - - - - 4x4.5 4.7 - - - - 4x4.5 4x4.5 5x4.5 10 - - - 4x4.5 5x4.5 5x4.5 6.3x4.5 22 - 4x4.5 5x4.5 5x4.5 6.3x4.5 6.3x4.5 - 33 4x4.5 5x4.5 5x4.5 6.3x4.5 6.3x4.5 - - 47 4x4.5 5x4.5 6.3x4.5 6.3x4.5 - - - 100 5x4.5 6.3x4.5 6.3x4.5 - - - - 220 6.3x4.5 - - - - - - rohs compliant includes all homogeneous materials
11 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com ripple current frequency correction factor cap. ( f) frequency 10< f < 1khz 1k< f < 10khz 10k< f > 100khz > 100khz 0.47 ~ 4.7 1.0 1.3 1.5 2.0 10 ~ 33 1.0 1.2 1.3 1.45 47 ~ 220 1.0 1.1 1.2 1.3 surface mount aluminum electrolytic capacitors nacp series nic part number cap. ( f) w.v. (vdc) dissipaton factor (tan ) max. ripple current (ma) +85c/120hz max. esr ( ) +20c/120hz load life hours @ +85c nacp330m4v4x4.5tr13f 33 4 0.40 28 20.1 1,000 nacp470m4v4x4.5tr13f 47 0.40 33 14.1 1,000 nacp101m4v5x4.5tr13f 100 0.40 56 6.6 1,000 nacp221m4v6.3x4.5tr13f 220 0.40 98 3.0 1,000 nacp220m6.3v4x4.5tr13f 22 6.3 0.30 28 22.6 1,000 nacp330m6.3v5x4.5tr13f 33 0.30 37 15.1 1,000 nacp470m6.3v5x4.5tr13f 47 0.30 45 10.6 1,000 nacp101m6.3v6.3x4.5tr13f 100 0.30 70 5.0 1,000 nacp220m10v5x4.5tr13f 22 10 0.24 33 18.1 1,000 nacp330m10v5x4.5tr13f 33 0.24 41 12.6 1,000 nacp470m10v6.3x4.5tr13f 47 0.24 53 8.5 1,000 nacp101m10v6.3x4.5tr13f 100 0.24 74 3.98 1,000 nacp100m16v4x4.5tr13f 10 16 0.20 23 33.2 1,000 nacp220m16v5x4.5tr13f 22 0.20 37 15.1 1,000 nacp330m16v6.3x4.5tr13f 33 0.20 51 10.1 1,000 nacp470m16v6.3x4.5tr13f 47 0.20 61 7.1 1,000 nacp4r7m25v4x4.5tr13f 4.7 25 0.16 17 56.5 1,000 nacp100m25v5x4.5tr13f 10 0.16 27 26.5 1,000 nacp220m25v6.3x4.5tr13f 22 0.16 47 12.1 1,000 nacp330m25v6.3x4.5tr13f 33 0.16 57 8.1 1,000 nacp4r7m35v4x4.5tr13f 4.7 35 0.14 18 49.4 1,000 nacp100m35v5x4.5tr13f 10 0.14 29 23.2 1,000 nacp220m35v6.3x4.5tr13f 22 0.14 49 10.8 1,000 nacpr10m50v4x4.5tr13f 0.1 50 0.12 1.0 1990 1,000 nacpr22m50v4x4.5tr13f 0.22 0.12 2.0 905 1,000 nacpr33m50v4x4.5tr13f 0.33 0.12 2.8 603 1,000 nacpr47m50v4x4.5tr13f 0.47 0.12 4.0 423 1,000 nacp1r0m50v4x4.5tr13f 1.0 0.12 8.4 199 1,000 nacp2r2m50v4x4.5tr13f 2.2 0.12 14 90.5 1,000 nacp3r3m50v4x4.5tr13f 3.3 0.12 17 60.3 1,000 nacp4r7m35v5x4.5tr13f 4.7 0.12 21 42.3 1,000 nacp100m35v6.3x4.5tr13f 10 0.12 33 19.0 1,000 standard values, case sizes and specifications
34 nic components corp. www.niccomp.com www.lowesr.com www.rfpassives.com www.smtmagnetics.com carrier tape surface mount aluminum electrolytic capacitors nacp series case size a 0.5 b 0.2 c 0.3 d 0.1 p 0.1 t 0.2 4 x 4.5 4.7 4.7 12.0 5.5 8.0 5.1 5 x 4.5 5.7 5.7 12.0 5.5 12.0 5.1 6.3 x 4.5 7.0 7.0 16.0 7.5 12.0 5.1 case size w 1.0 quantity per reel 13" reel (std) 15" reel (opt.) 4 x 4.5 14.0 1,500 pcs 2,000 pcs 5 x 4.5 14.0 1,000 pcs 1,000 pcs 6.3 x 4.5 18.0 1,000 pcs 1,000 pcs tr13 330mm (13") reel tr15 380mm (15") reel taping specifications (mm) 1. both leader and trailer tape: minimum 40mm (1.57") empty carrier tape pockets. 2. leader tape: approximately 20cm of cover tape at leader. 3. connection: maximum 3 connections (slices) per reel. 13 ? 0.5 3.0 0.5 330 or 380mm 50 ? min. 21 0.8 2.00.5 w reel t a p feeding + - 1.5 ? +0.1/- 1.75 d b c 1.5 +0.1/-0 1.75 + 0.15 0.4 + 0.2 4 + 0.1 carrier
|
